通比牛牛

Shenzhen Baisheng Warehousing Equipment Co., Ltd.
CN  -  EN13590260810 13538178364
News
Contact us
Telephone:0755-26780440
Fax:0755-26001859
Phone:13590260810
Phone:13538178364
Address:No. 19, Xinwucun East District, Taoyuan Street, Xili Town, Nanshan District, Shenzhen City

Common problem

Position:Home > Common problem

Maintenance Method of Storage Shelf

Time:2019-03-11 11:46:01
Storage shelf materials are made of iron or steel,but it is very important to use shelves correctly and reasonably and maintain them properly.Correct use of shelves can reduce damage to shelves and save costs.Regular maintenance of shelves can prolong shelves'service life and save a lot of expenses.The following is the correct use and maintenance of storage shelves carefully summarized by Rongshengda shelves.Nursing precautions:
First,the shelf is generally surface treated in the use process,but still need to pay attention to moistureproof,avoid shelf rust,especially the shelf interface location,special attention,very easy to rust,so it is generally best to often wipe when there is humidity.
2.Pay attention to the overload of shelves,each shelf has a certain load-bearing capacity,and has been designed in the process of designing shelves,so we should pay attention to the usual use,it is best not to overload,when choosing and purchasing shelves,according to their own actual situation,light shelves or medium shelves are appropriate,before purchasing shelves,we should design the type of shelves.
3.The size of the goods should not exceed the specifications of the shelves.The size of the cardboard and the goods should be less than 100 mm of the dimensions in the shelves.
4.Avoid shelves being hit by goods,so when handling goods,they should be handled lightly.
Fifth,we should follow the principle that the bottom of the shelf is heavier than the top,that is,the bottom is heavier than the top is lighter.
6.Careful attention should be paid to the selection of cardboard.Do not use non-standard cardboard with unqualified quality.
7.When storing goods on shelves,personnel should not enter the bottom of shelves to avoid danger and ensure the safety of users.
Maintenance of display rack
1.The cloth must be clean.
When cleaning and maintaining the display rack,we must first determine whether the cloth used is clean.When cleaning or wiping away the dust,be sure to turn over or change a clean cloth for reuse.Don't slack off and reuse the dirty side again and again,which will only make the dirt rub repeatedly on the surface of commercial furniture,but will damage the bright surface of the display rack.
2.Selection of Nursing Agents
In order to maintain the original brightness of the display rack,there are two kinds of display rack maintenance products:wax spraying and cleaning agent.The former is mainly aimed at various wood,polyester,paint,fire-proof plywood and other materials of display racks,and has two different fresh fragrances of jasmine and lemon.The latter is suitable for all kinds of solid wood display frames,such as wood,glass,synthetic wood or durable panels,especially for mixed material display frames.Therefore,if we can use maintenance products with both cleaning and nursing effects,we can save a lot of valuable time.
Before the use of wax spray and cleaning agent,it is best to shake it up first,then hold the spray tank straight,at a 45 degree angle,so that the liquid components in the tank can be released completely without losing pressure.After that,gently spray the dry cloth at a distance of about 15 centimeters,so as to wipe commercial furniture,it can play a very good cleaning and maintenance effect.In addition,after using the cloth,remember to wash and dry.As for display racks with fabric materials,such as fabric sofas and recreational cushions,cleaning and maintenance agents for carpets can be used.When in use,dust is first cleaned with a vacuum cleaner,and then a small amount of carpet detergent is sprayed on a wet cloth to wipe it.
3.Lacquer Watermark Removal
The lacquered tables with wet tea cups often leave an annoying ring of watermarks.How can they be removed quickly?You can lay a clean wet cloth on the watermarking of the desktop and iron it with an iron at a lower temperature so that the moisture that penetrates the paint film evaporates and the watermarking disappears.However,when using this method,the cloth used can not be too thin,and the temperature of the iron can not be adjusted too high.Otherwise,the watermarking on the desktop will disappear,but the branding will never be removed.
Maintenance of Iron Exhibition Frame
Iron exhibition frame has its durability and durability.Generally speaking,daily wear and tear can make it more ancient,but this does not mean that iron exhibition shelves need no maintenance.Because of the particularity of material and technology,the maintenance and maintenance of iron exhibition racks are also special.
I.Outdoor Iron Exhibition Frame
The material selection of outdoor iron exhibition stand requires anti-rust,anti-wear,anti-corrosion,anti-exposure and so on.Generally speaking,manufacturers have taken into account the characteristics of the outdoor environment in the production process,so users only need to identify well-known manufacturers when choosing and purchasing,and do not want to buy some inexpensive products with unqualified quality.But the following points must be done:
1.dust removal.
There is a lot of dust in the outdoors,and it will be a layer of dust on the surface of the exhibition shelf for a long time.It will affect the effect of the exhibition shelf,which will lead to the damage of protective film on the exhibition shelf for a long time.Therefore,outdoor iron exhibition racks should be regularly wiped,generally with soft cotton fabric wiping is better.
2.moistureproof.
In the north,you can rest assured of the rust resistance of iron exhibition frames.In foggy weather,use dry cotton cloth to wipe off the water droplets on the exhibition shelf;in rainy days,it is necessary to wipe the water droplets in time after the rain stops.When choosing the exhibition stand in the south,we must pay attention to the type of steel we choose.
II.Indoor Iron Exhibition Frame
1.Avoid bumping.
This is the first point to be noticed after the purchase of iron exhibition shelves,exhibition shelves should be carefully placed in the process of handling;the place where the exhibition shelves should be placed should be the place where hard objects are not often encountered;once the place is selected,it should not be frequently changed;the ground where the exhibition shelves are placed should also be kept flat,so that the four legs of the exhibition shelves are stable,if unstable,it will cause slight deformation of the exhibition shelves over time,affecting the service life of the exhibition shelves.Life.
2.Clean dust removal.